- Boards, Modules and Accessories, Motors, Drivers and Wheels
28BYJ-48 Stepper Motor 5V DC
- High precision: 64 motor steps (5.625° per step) with a 1:64 gearbox for fine positioning
- Unipolar design for easy control with Arduino, Raspberry Pi and other microcontrollers
- Runs on a safe 5V DC supply ideal for battery-powered and portable projects
- Built-in gearbox increases torque and effective resolution (common effective output: 4096 steps)
- Compact, lightweight housing fits tight spaces in robotics and automation
- Compatible with ULN2003 and equivalent driver boards for plug-and-play integration
SKU: n/a - Boards, Modules and Accessories
ULN2003 Stepper Motor Driver Board
– Plug-and-play ULN2003 motor driver module for quick prototyping
– Compatible with 28BYJ-48 stepper motors and Arduino boards
– Robust ULN2003 driver IC, up to 500 mA per channel
– Built-in flyback diodes for protection against voltage spikes
– Quiet, stable stepping and low heat under typical loads
– Easy breadboard/shield mounting; ideal for robotics and hobby projectsSKU: n/a
28BYJ-48 Stepper Motor 5V DC
Out of stock
- High precision: 64 motor steps (5.625° per step) with a 1:64 gearbox for fine positioning
- Unipolar design for easy control with Arduino, Raspberry Pi and other microcontrollers
- Runs on a safe 5V DC supply ideal for battery-powered and portable projects
- Built-in gearbox increases torque and effective resolution (common effective output: 4096 steps)
- Compact, lightweight housing fits tight spaces in robotics and automation
- Compatible with ULN2003 and equivalent driver boards for plug-and-play integration
₨ 250 ₨ 300
Out of stock
Overview
The 28BYJ-48 Stepper Motor 5V DC is an affordable, compact unipolar stepper motor designed for precise motion control in robotics, automation, camera rigs and DIY electronics. With a native motor step angle of 5.625° (64 steps per revolution) and an integrated 1:64 gearbox, the 28BYJ-48 increases torque and delivers fine positional control from a single 5V DC supply.
Key Benefits
Precision and torque
- 64 steps per motor revolution (5.625° per step) before gearing.
- 1:64 gearbox multiplies torque and refines effective resolution for smoother movement and higher positional accuracy.
- Common effective output used in many projects: 4096 steps per output revolution for precise micro-positioning.
Easy integration and control
- Unipolar coil arrangement simplifies wiring and driving from microcontrollers.
- Works seamlessly with Arduino, Raspberry Pi, ESP modules and other development boards.
- Compatible with popular driver modules such as the ULN2003 breakout board for safe, reliable switching.
Low voltage operation
- Operates on 5V DC, ideal for battery-powered and portable applications.
- Gearbox provides more torque than a similar direct-drive motor, suitable for small load-bearing tasks.
Specifications
- Model: 28BYJ-48
- Operating voltage: 5V DC
- Step angle (motor): 5.625° (64 steps per revolution)
- Gear reduction ratio: 1:64
- Effective steps per output revolution: 4096 (commonly used value in many configurations)
- Coil resistance: approximately 50 ohm per coil (typical)
- Type: Unipolar stepper motor
- Typical use: Low-speed precision positioning, hobby robotics, small automation tasks
- Dimensions & weight: Compact, lightweight design (refer to manufacturer drawing for exact measurements)
Typical Applications
- Small robotic arms and articulation points
- Camera sliders, pan and tilt heads
- DIY CNC add-ons and low-cost automation
- Automated blinds, curtains and home automation devices
- Educational kits, motorized toys and model projects
Wiring and integration tips
- Always use a driver board (ULN2003 or compatible) to isolate the microcontroller from the motor coils and to handle coil current safely.
- Provide a stable 5V DC supply sized to handle motor and driver current; avoid powering the motor from MCU pins.
- Implement step sequencing or microstepping in software to reduce vibration and achieve smoother motion. Libraries such as AccelStepper for Arduino help manage speed and acceleration.
- If the load is heavier than expected, add mechanical gearing or choose a higher-torque motor.
- Decouple the motor supply with capacitors and keep wiring short to reduce electrical noise and interference.
Quick start guide (Arduino)
- Connect the 4-pin connector from the ULN2003 driver board to the 28BYJ-48 motor socket.
- Wire the driver VCC to a stable 5V supply and GND to ground. Connect the ULN2003 IN pins to Arduino digital outputs.
- Install a stepper control library (for example, AccelStepper) and configure the step sequence to match the motor wiring.
- Begin with low speed and acceleration values, then tune for smoother motion and reduced resonance.
Frequently asked questions
Can I drive the 28BYJ-48 directly from an Arduino pin?
No. The motor coils draw more current than MCU pins can safely supply. Always use a driver such as the ULN2003 or an equivalent transistor/driver module.
What is the effective step resolution with the gearbox?
The motor has 64 steps per revolution. With the 1:64 gearbox the commonly used effective step count is 4096 steps per output revolution. Verify your wiring and step mode to calculate exact increments for your control code.
Is this motor suitable for high-speed continuous rotation?
The 28BYJ-48 is optimized for low-to-moderate speed, high-precision tasks. For sustained high-speed operation, choose a motor rated for higher RPM and continuous duty.
Why choose the 28BYJ-48 Stepper Motor 5V DC?
The 28BYJ-48 offers an excellent balance of cost, size and performance for hobbyists, educators and entry-level automation projects. Its 5V operation, unipolar design and integrated gearbox make it ideal for Arduino and Raspberry Pi projects where compact size, low voltage and straightforward integration are priorities.
Notes
Product images are for illustration only and actual appearance may vary. For mechanical drawings, driver wiring diagrams and full electrical specifications, consult the manufacturer datasheet.
Ready to add precise, low-voltage motion control to your project? The 28BYJ-48 Stepper Motor 5V DC delivers reliable performance and simple integration for a wide range of applications.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.81 rating from 608 reviews
- Boards, Modules and Accessories, Accessories
Big Dotted Veroboard (10cm x 24cm)
- Large 10cm x 24cm board – ideal for complex circuits and multi-project layouts.
- Dotted pre-drilled layout with standard 2.54mm pitch for flexible component placement.
- Durable phenolic construction for strength and repeated use.
- Copper-clad side for reliable solder joints and stable electrical connections.
- Versatile for prototyping, DIY electronics, education, and experimentation.
- Compatible with standard 2.54mm leaded components, ICs, resistors and capacitors.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-040 360 Degrees Rotary Encoder Module
– 360-degree continuous rotation detection for accurate position feedback
– High-resolution digital pulse output for precise control
– Built-in push button for extra input functionality
– Easy Arduino compatibility with simple 5-pin wiring (VCC, GND, CLK, DT, SW)
– Low current consumption (max 10mA) and durable construction for long-term use
– Compact dimensions (approx. 23mm x 12mm) ideal for tight project spacesSKU: n/a - Sensors And Modules
LM35DZ Temperature Sensor
- Linear Celsius output: 10mV per °C for direct temperature readings
- High accuracy: ±0.5°C at 25°C for reliable measurements
- Operating range: 0°C to 100°C; supply 4V to 30V
- Low power consumption: typically less than 60µA to minimize self-heating
- Compact TO-92 package for easy mounting in circuits
- No external calibration required; simple integration with microcontrollers
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and other microcontrollers
SKU: n/a - Boards and Programmers
Raspberry Pi 5 Model B 4GB RAM Development Board
.wa-price-card{--wa-green:#25D366;--wa-green-dark:#1ebe57;--wa-green-glow:rgba(37,211,102,0.25);font-family:system-ui,-apple-system,sans-serif;background:#f0faf3;border:1.5px solid #d4f0dd;border-radius:14px;padding:22px 24px;display:flex;align-items:center;justify-content:space-between;gap:20px;transition:border-color 0.3s,box-shadow 0.3s;box-sizing:border-box;margin:15px 0;width:100%}.wa-price-card:hover{border-color:var(--wa-green);box-shadow:0 4px 24px var(--wa-green-glow)}.wa-price-card .wa-icon-circle{width:52px;height:52px;min-width:52px;border-radius:50%;background:var(--wa-green);display:flex;align-items:center;justify-content:center;box-shadow:0 4px 14px var(--wa-green-glow);flex-shrink:0}.wa-price-card .wa-icon-circle svg{width:26px;height:26px;fill:#fff}.wa-price-card .wa-text{flex:1;min-width:0}.wa-price-card .wa-text h4{font-size:15px;font-weight:700;color:#1a2e1f;margin:0 0 3px 0;line-height:1.3}.wa-price-card .wa-text p{font-size:12.5px;font-weight:500;color:#4a6b52;line-height:1.4;margin:0}.wa-price-card .wa-btn{display:inline-flex;align-items:center;gap:8px;background:var(--wa-green);color:#fff !important;font-family:inherit;font-size:14px;font-weight:700;padding:12px 24px;border:none;border-radius:50px;cursor:pointer;text-decoration:none !important;white-space:nowrap;line-height:1;overflow:visible;transition:background 0.2s,transform 0.15s,box-shadow 0.2s;flex-shrink:0}.wa-price-card .wa-btn:hover{background:var(--wa-green-dark);color:#fff !important;transform:translateY(-1px);box-shadow:0 6px 20px var(--wa-green-glow)}.wa-price-card .wa-btn:active{transform:translateY(0)}.wa-price-card .wa-btn svg{width:18px;height:18px;min-width:18px;fill:#fff;flex-shrink:0}@media(max-width:520px){.wa-price-card{flex-direction:column;text-align:center;padding:20px;gap:14px}.wa-price-card .wa-btn{width:100%;justify-content:center}}
Get PricePrices are updating frequently
Contact us on WhatsApp to get the current price & availability
– Latest Raspberry Pi 5 Model B with 4GB LPDDR4X-4267 RAM
– 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU for 2 to 3x faster performance
– VideoCore VII GPU with dual 4Kp60 HDMI output and hardware video decoding
– High-speed I/O: 2x USB 3.0, 2x USB 2.0, Gigabit Ethernet, PCIe expansion
– Dual MIPI camera and display connectors plus 40-pin GPIO header
– Supports microSD, optional NVMe via PCIe adapter, and Raspberry Pi OS/UbuntuSKU: n/a - Accessories, Boards, Modules and Accessories
Arduino UNO and MEGA USB Cable
- Reliable Arduino USB cable for programming, data transfer, and powering boards
- Compatible with Arduino UNO, Mega, Nano and other microcontrollers
- Durable, flexible construction designed for long-term use
- Supports both data communication and charging for uninterrupted projects
- Available in multiple lengths to fit different workspaces
- Order now with fast delivery in Islamabad
SKU: n/a - Accessories
Pixhawk Anti-Vibration Shock Absorber Vibration Damper
- Effective vibration isolation for Pixhawk, APM, KK, and MWC flight controllers
- Reduces high-frequency vibrations from motors and propellers for improved flight stability
- Dual plate design with rubber/silicone dampers for optimal sensor accuracy
- Lightweight construction (20-30g) with minimal impact on drone weight
- Easy installation using screws, standoffs, or adhesive pads
- Multi-purpose use for flight controllers and camera stabilization systems
SKU: n/a
















Reviews
There are no reviews yet