A2212 2200KV BLDC Brushless DC Motor

Overview

The A2212 2200KV BLDC Brushless DC Motor is a high-performance outrunner motor engineered for RC aircraft, multirotor drones, quadcopters, and lightweight robotics. With a 2200KV rating this motor produces high RPM per volt for fast response and high-speed applications while maintaining efficient power consumption and dependable operation.

Key Benefits

• High RPM per volt for rapid throttle response and strong top-end speed
• Brushless outrunner design for improved torque and efficiency compared to brushed motors
• Precision copper windings and high-strength permanent magnets for stable, consistent output
• Durable metal shaft and quality bearings for smooth rotation and extended service life
• Lightweight, compact construction that maximizes thrust-to-weight ratio
• Broad compatibility with commonly used ESCs and LiPo battery packs

Typical Specifications (may vary by manufacturer)

• Motor type: Brushless DC outrunner
• KV rating: 2200KV
• Recommended battery: 2S to 3S LiPo (verify for your setup)
• Connector compatibility: Standard motor leads for ESCs
• Construction: Precision copper windings, permanent magnets, metal shaft, and sealed bearings
• Weight: Lightweight design for multirotor and fixed-wing applications

Note: Exact measurements such as weight, maximum current, and shaft dimensions can vary by manufacturer and model batch. Always check the specific product label or datasheet for precise values before installation.

Recommended Use and Compatibility

The A2212 2200KV motor is best suited for smaller RC platforms and quick-response applications. Typical pairings include:

• ESC: 20A to 30A electronic speed controllers (ensure ESC supports the expected current draw)
• Batteries: 2S to 3S LiPo packs for balanced performance and efficiency
• Propeller sizes: Common prop ranges include 8×4 to 10×4.7 for efficient thrust (test for your specific aircraft or drone)

Applications

• RC airplanes and fixed-wing models
• Quadcopters and multirotor drones
• Lightweight RC helicopters
• DIY robotics and experimental projects
• STEM and educational motor experiments
• Hobby and model-building projects

Installation Tips

• Secure the motor firmly to the motor mount using the appropriate screws and lock washers to avoid vibration
• Use an ESC with adequate current rating and a compatible firmware for brushless motors
• Balance propellers before flight to reduce vibration and extend bearing life
• Confirm correct motor rotation and calibrate ESC throttle endpoints before use
• Ensure adequate airflow for cooling during sustained high-load operation

Maintenance and Care

• Inspect the motor shaft and bearings periodically for wear and replace if necessary
• Keep windings and magnets free from debris and moisture
• Do not exceed recommended voltage and current to avoid overheating
• Store in a dry environment when not in use to preserve magnets and bearings

Package Contents

• A2212 2200KV BLDC Brushless DC Motor
• Standard motor mounting hardware (may vary by vendor)
• Instruction or specification sheet (where provided)

Additional Notes

Images are for illustration purposes only. Specifications and included accessories may vary between manufacturers and product batches. Always verify compatibility with your ESC, propeller, and battery before installation.